Smart irrigation · Irrigation actuator
BrioAgro Aqua Power: smart irrigation with the controller you already have
Don't change your controller. Connect it. Aqua Power links it to the sensors and irrigates when the crop needs it.

BrioAgro Aqua Power is an irrigation actuator: a small device installed next to your controller or motor panel that starts irrigation when instructed by the BrioAgro platform. With it, your existing installation irrigates based on real soil moisture.
It is BrioAgro's best-selling irrigation product because it solves the most common issue in the field: the farmer already has a controller and does not want to change it.
95 %
of irrigation controllers on the market are compatible with Aqua Power.
Tested with drip irrigation, sprinklers, micro-sprinklers and pivots.
What Aqua Power does
Aqua Power receives orders from the BrioAgro platform via mobile network and transfers them to your installation. It does not replace your controller: it tells it when to start and when to stop.

Connects
Links the controller or irrigation motor with BrioAgro sensors.
Executes
Triggers irrigation when soil moisture requires it, or when you order it from your mobile.
Informs
Every irrigation is recorded and you see it in the app.
Two ways to connect it
With an irrigation controller
Aqua Power connects to the controller you already have and maintains your sectors and your way of irrigating. It is compatible with 95% of controllers on the market.
Without an irrigation controller
If you irrigate by starting the motor manually, Aqua Power can turn it on and off directly. It is the simplest way to move from manual irrigation to smart irrigation.
Two relays, two activations
Aqua Power manages two relays. This allows it to control two independent activations: for example, the irrigation motor and the well pump, or another element of the installation.
Each activation can be managed from your mobile, and smart irrigation decides when to trigger them.

Smart irrigation even with a simple controller
You don't need an advanced controller. A simple controller, even a gardening one, connected to Aqua Power allows for smart irrigation linked to the sensors and the BrioAgro platform.
The intelligence is not in the controller: it is in the sensors, in the soil moisture calibration algorithm and in the platform. Aqua Power is the bridge between that information and your irrigation.
Smart irrigation is the sum of two things: sensor information and the connection to irrigation. Aqua Power is that connection.
How it works with the sensors
The sensor measures
A ViTA sensor placed next to the roots measures the soil moisture.The platform decides
It combines that reading with the weather of your plot and satellite imagery, and calculates when irrigation is needed.Aqua Power acts
It gives the order to the controller or starts the motor.You supervise
You see the irrigation on your mobile and can change the mode whenever you want.
Irrigation modes
Smart irrigation
Irrigates when the crop needs it.
Scheduled irrigation
You schedule it from your mobile.
Manual irrigation
From the field or from your mobile.
Permitted hours
Limits the hours when irrigation is allowed.
Electricity tariff
Irrigates during off-peak hours.
Pause
Stop irrigation during field operations or maintenance.
Installation
Aqua Power is installed next to the controller or motor panel. The connection can be made by your usual installer or electrician, with guidance from our technicians.
- Tell us what controller or motor you have.
- We check compatibility before installing anything.
- We support you during commissioning.
FAQs
What is Aqua Power?
It is the BrioAgro irrigation actuator: it connects to your controller or motor and starts irrigation when indicated by the platform.
Can I automate irrigation without changing my controller?
Yes. Aqua Power connects to the controller you already have. It is compatible with 95% of controllers on the market.
How do you connect a soil moisture sensor to an irrigation controller?
The sensor is not wired to the controller. It sends its data to the BrioAgro platform, and Aqua Power, connected to the controller, executes the irrigation.
What if I don't have a controller?
Aqua Power can turn the motor on and off directly.
How many elements can it control?
Two, one per relay: for example, the motor and the well pump.
Does it work with a garden controller?
Yes. A simple controller connected to Aqua Power already allows for smart irrigation.
Do I need sensors?
For smart irrigation, yes: at least one ViTA sensor. To schedule and trigger irrigation from your mobile, Aqua Power is enough.
What if I also want to control fertilisation?
Then your equipment is Aqua Fertirriego.
Is your installation compatible with Aqua Power?
Tell us which irrigation controller or motor you have and we will check it with you.
Keep exploring
The next step begins on your farm.
Tell us what you grow or how your advisory firm works. The team will help you assess the right solution.
FAQs
We talk about your crop
Tell us how you irrigate, the surface area and what you need to improve.
We measure in the field
The installation and readings are adapted to the characteristics of your farm.
You decide with information
Check soil evolution and work with the support of our team.