Gen4Olive is an #H2020 project that aims to bring #olive genetic resources closer to producers and olive growers. It focuses on rainfed olive varieties resistant to the most demanding conditions.
28 November 2022 was the date chosen for the installation of the measurement and monitoring devices. The devices installed by BrioAgro are a model called ViTA, custom-configured for the needs of the project.
The DSB ViTA (or ViTA Tracking Device) is a solar-powered datalogger with different communication systems (Sigfox, Lora, LTE-M, Narrow Band or 3-4G); the system uses the one that provides the best coverage. As BrioAgro works with a multi-operator system, it always receives the best signal, regardless of which company has the nearest repeater tower.
In both cases, the following sensors have been connected to this ViTA:
SOIL.
- Moisture sensor at 40 cm depth
- Moisture sensor at 20 cm depth
- Temperature sensor at 20 cm depth. Temperature is measured in ºC, while soil moisture is measured in litres/m3 (number of litres in a m3 of soil) and in % relative to field capacity, with 100% being the Field Capacity value and 0% the Permanent Wilting Point value.
To apply these relative values, it is necessary to use the BrioAgro soil calibration protocol, which uses an algorithm tested in all types of crops, soils and microclimates, to establish the exact values. -
SURFACE ENVIRONMENT
- Temperature (ºC)
- Relative Humidity (%)
- Water deficit (g H2O/kg air
- Pressure (mBar)
- Leaf wetness (%)
- Active thermal integral (ºC)
- Effective thermal integral (ºC)
- Accumulated chilling hours (ºC)
Farm no. 1. Arbequina variety: Lora de Estepa, 41564, Seville, Andalusia, Spain.
Installed right at the time of harvest, the sector where the sensor was placed was harvested days before.
Farm no. 2. Manzanilla: Estepa, 41560, Seville, Andalusia, Spain
It was installed a few weeks after the harvest. On this farm, in addition to the placement of sensors, a high-resolution video camera with 330º rotation was installed, ready for outdoor use.
330º camera in the background, sensors on the right.
Sectorised satellite monitoring.
BrioAgro will also provide the GEN4OLIVE project with the data collected from Sentinel satellite monitoring of 15 indicators, which are updated every 5 days, with a resolution of 10 x 10 m per pixel. These are the following indicators
1 GNDVI, 2 MSAVI, 3 MSAVI2, 4 NDII, 5 NDMI, 6 NDRE, 7 NDVI, 8 NDWI, 9 NDWI2, 10 RECI, 11 SAVI, 12 SIPI1, 13IPI3, 14 TCARI/OSAVI, 15 TSAVI.
